G-VA Polishing Flap Disc 115mm x 22.23mm

Introducing the G-VA Polishing Flap Disc.

To start, process the work piece with the coarse G-VA Polishing flap disc followed by medium and fine.
The Gloss Polishing flap disc is always used with a corresponding polishing compound.

Step 1: Start with a pre-polishing compound (e.g. white by Unipol).
Step 2: Use a new Polishing flap disc with a high-gloss polishing compound (e.g. blue by Unipol) in order to obtain a high-gloss surface.

For the polishing of aluminium and non-ferrous metals, use a polishing compound especially for these materials (e.g. brown by Unipol).
With a reduced working speed of 4.500 rpm, better polishing results are achieved than with the angle grinder at full speed.